Yes we do! There is an extra charge and is based on the total price of the product you purchase. Here's the breakdowns-but Costs can vary depending your location: Up to $80 is $10 to ship, $80-$125 is $30 to ship, $125-$200 is $75 to ship, $200-$400 is $99 to ship, $400 and over is $135

Yes it will fit your truck. The installation is very simple. There are four mounting points on the seat brackets that you will install speed nuts on to. Then It’s just a matter of bolting it into those brackets. Takes about 15-30 minutes. Let me know if you have any other questions. Thanks, Earl

The site information is correct and the CrewMax does fit the 2014-2021. We made the video in 2017 and plan to remake a new video with the update.

The pushbutton start was not introduced until 2020. We had to re-design the plastic storage and the three compartment metal storage to accommodate for that option. The long box did not have to be modified due to the supplied brackets allowing the box to sit above that. You're good to go with the models that have the push button start.

You can contact Offroad Alliance in Conroe or Fred Haas Toyota in Spring are our Houston area dealers and they will install the storage for you!

We do not have a dealer in Tuscon. Closest would be down in Phoenix at Earnhardt Toyota. Call if you plan to purchase a storage unit and I will do some research.Thanks! Earl

Yes it will, however it will stick out about an inch past the seat bottom.

Not really. There is an area that you need to be careful due to a wire and sensor, but the template shows you where that is.

Yea we do! They run 125 to install

A seperate backplate is not needed. The provided screws mounts to the back of the panel. NOTE: This is the metal plate and screws only & doesn't include the Dash Panel

Hi Russell, Yes you can upgrade. You most certainly can upgrade. Once you do though, you can't go backwards, lol. You will only have to cut out more foam to get it to fit. Let me know if you have any other questions. Thanks, Earl

Hi Dave, Unfortunately this will not work with your seat configuration. Due to the fact that your rear seat does not fold up, there is no way to make it work under the seat. We do not have an alternative either, however we do offer center console safes. If you don't see your model and make console in our product list, we can get it for you.

Thank you, Earl

Yes we are at 1663 Industrial Ave unit B Norco, Ca 92860

This kit is a permanent install. They can be removed but it’s not as simple as just waiting it out.

Hi Brad, No it won’t interfere at all. In fact we see a lot of people do that as they are installing.

The item in question is the faceplate for Sequoia -P3 tekonsha brake controller.

SKU: TP3PLT-7

It would go in the dash under the stereo, between the power ports in Heath at open area.

Give me a call at (951) 858-3418 and I will get one set up. The other thing you have to do is extend the wire harnesses 6-8” but that’s not hard to do. We have them in Stock

No it does not. We could not use the combo lock due to the height of the lock body. It would interfere with the seat.

Hi Shane, It’s not exactly the same. You will have to take a bit more carpet and foam out to do the metal, but doable. Once you have the metal one in though, you can’t go back to the plastic.

If your AR fits in the existing storage, it will fit in ours. Yes you get four keys that are the same that will open both locks.

44x14x7 are the dims.

Yes right here in Southern California

Kim Yes we can install just let us know when you would like it done. We charge $65 Thank you for inquiring! Earl Pike 951-858-3418 text or call anytime esptruck.com

The seats might stay up on their own until someone sat on them. But they do need something under them that will to support any weight on them. This is why he had to remove the brace or platform before installing the box. I hope this helps you.